Polycom DOC2237A Manual de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 170
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
MGC Hardware and Installation Manual
2-39
The MCU Properties dialog box opens.
b. Enter the IP address of the MCU as you have defined in the IP
Configuration.
c. Click OK.
Using a DOS Diskette with the Updated LAN.CFG File
1. Using Windows Notepad, create a new text file with the following text:
IP_ADDRESS = aaa.bbb.ccc.ddd
NETWORK_MASK = aaa.bbb.ccc.ddd
DEFAULT_GATEWAY = aaa.bbb.ccc.ddd,
where aaa, bbb, ccc, and ddd are numbers between 0 to 255, as follows:
Table 2-3: IP Configuration Options
Option Description
IP Address Enter the IP address allocated to the MCU by
the network administrator.
Subnet Mask Enter the IP address of the subnet mask.
Default Gateway Enter the IP address of the default gateway.
The current MCU name.
To modify, type a new
name
MCU IP address. Enter
the IP address of the MCU
as allocated by the
network administrator
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 169 170

Comentarios a estos manuales

Sin comentarios