Polycom A800 Manual de usuario descargar pdf (Pagina 28)

Configuration Guide

PN: 1725-36080-001_J.doc

CLI Commands to Set Up Subnet Roaming

Commands for the master switch (the Aruba 800)

Configure terminal

ip default-gateway <ip_addr of router>

ap location 1.1.0 (#ap connected to 800)

lms-ip <ip_addr of 800 switch>

ap location 1.2.0 (#ap connected to 6000)

lms-ip <ip_addr of 6000 switch>

ip route 224.0.0.0 255.0.0.0 <ip_addr of SpectraLink

gateway>

exit

write mem

Commands for the local switch (the Aruba 6000)

The AP’s IP address must be on the same subnet as the switch.

Configure terminal

masterip <ip address of the master >

interface loopback

ip address <ip_addr of the 6000>

vlan 1

interface vlan 1

ip address <ip_addr of the 6000> <netmask>

interface fastethernet <port>

switchport access vlan 1 (only if the port is an

access port)

trusted

no shut

ip default-gateway <ip_addr of router>

exit

write mem

After the master switch IP address and the local switch IP address are

configured on the local switch, the switch needs to be rebooted prior

to use.

1 2 ... 23 24 25 26 27 28 29 30

Sin comentarios

Polycom A800 Manual de usuario Pagina 28