Polycom A800 Manual de usuario descargar pdf (Pagina 7)

Aruba Mobility Controllers: A200, A800, A2400, A6000

PN: 1725-36080-001_J.doc

Via the CLI

By default, only SSH (Secure Shell) access to the switch (mobility

controller) is permitted.

1. From a management system that has network connectivity to the

switch, connect to the switch using SSH:

ssh admin@<switch IP address>

2. Enter the admin password at the password prompt.

3. Type

enable at the > prompt to enter the enable mode.

4. Type the enable password when prompted for a password.

Via the Web interface

Once the connectivity to the switch is verified, open a Web browser

and enter the switch’s IP address in the navigator bar.

The switch can be accessed using http at http://<switch IP Address>

or https at https://<switch IP Address>:4343.

The user is prompted with the username and password configured (in

the example above, the

username/password configured is

admin/admin). On successful login the following Network Summary

screen is displayed:

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Sin comentarios

Polycom A800 Manual de usuario Pagina 7