Polycom DOC2238A Manual de usuario descargar pdf (Pagina 44)

Chapter 2 - Hardware Installation

2-24

6. Place the MPI box with its four 160-pin connectors facing the MCU front

panel between the two mounting brackets. Secure it with the screws

supplied with the MPI Box.

7. If the MCU is standalone, reassemble the side panels.

If the MCU is rack mounted, mount the unit on the rack and connect all

the external cables.

8. Using the cable provided with the MPI kit, connect the 160-pin

connector to Port A of the MPI-8 Network Interface front panel. Connect

the other end of the cable to a (Ports 1-4) 160-pin connector of the MPI

Box; by doing this procedure we have utilized the MPI Box as a MPI-4.

9. Using a second cable, connect the angled 160-pin connector to Port B of

the MPI-8 Network Interface front panel. Connect the other end of the

cable to B (Ports 5-8) 160-pin connector of the MPI Box.

Using this procedure we have utilized the MPI Box as a MPI-8.

front

rear

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 159 160

Sin comentarios

Polycom DOC2238A Manual de usuario Pagina 44