Polycom DOC2230A Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
3-1
3
Initial System Configuration
The MGC-50/MGC-100 requires basic configuration before you can start
running conferences.
Initial IP Configuration
The system is shipped with a default IP address: 129.254.4.8. Ordinarily,
you need to change the MCU’s default IP address to the IP address
appropriate for the site's LAN. This section describes how to modify it using
a monitor and terminal to connect directly to the MCU.
To modify the MCU default IP address to the site’s IP address:
1. Remove the Main Control Module cover.
Figure 3-1: MGC-100 Rear Panel
Initial IP
Configuration
Installing the
MGC Manager
Connecting
to an MCU
Configuring the
Network Services
Defining an MCU
Starting the MGC
Manager
NET
A
B
LANALARMSCOM 1COM
MUSIC
LINE IN
L
N
K
T
/
R
KB0
10/100 Mbits
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 143 144

Comentarios a estos manuales

Sin comentarios